Blocking/Filtering Get admission to Scheduler: Allows you to choose a device connected to your network and set Internet Get admission to rules. Service Blocking: Allows you to choose a device connected to your network and block specific Internet products and services. Website Blocking: Allows you to choose a device connected to your network and block that device from getting access to certain websites. Broadband Settings: Permits you to change the connection parameters to your service provider. These settings must not be changed unless instructed by your ISP. WAN Settings WAN Settings: Permits you to change the protocol and addressing type required by your ISP for Internet Get admission to. These settings must not be changed unless instructed by your ISP. Dynamic DNS: Associates the WAN IP address of your router with a hostname. LAN Settings DHCP Settings: Permits you to edit the DHCP settings that define the LAN addressing parameters for your modem to allocate IP addresses to LAN devices. DHCP Reservations: Leases a permanent DHCP allocated address to a client. DNS Host Mapping: Creates a static hostname for the specified IP address in the DSL router. WAN and LAN IP addresses are supported. LAN Subnets: Your modem can make stronger a couple of LAN subnet settings. Use the DHCP Settings page to configure the default IPv4 subnet. QoS: Prioritizes traffic types (such as VoIP) before standard data traffic. Traffic shaping your network with QoS can increase application performance and prevent your network from becoming overloaded. Remote Management Remote GUI: Enables Get admission to to the router from a WAN connection. To Get admission to your modem remotely it is important to use https:// followed by the modem WAN IP address. You’ll manage the Administrator Username and Password for the modem GUI here.