Proxicast 3G / 4G LTE 9 dBi Omni-Directional Permanent Mount Outdoor Fiberglass Antenna for Verizon, AT&T, Sprint, T…

$124.95

Works with 2G, 3G, 4G, LTE, xLTE, AWS, GSM & CDMA cell carriers such as Verizon, AT&T, Sprint, T-Mobile, Telus, Bell Canada, Rogers, DigiCel, TelCel and more
Improves poor signal via high 9 dBi gain for cellular (700, 850, 900, 1700, 1800, 1900 and 2100 MHz), 2.4 GHz WiFi and 900 MHz ISM wireless bands
Female N connector with 12″ pigtail – Outdoor weatherproof fiberglass with high gloss urethane finish – Integrated ground plane – No additional ground plane needed – Mast sold separately

Description

Proxicast introduces the industry’s first high-gain permanent mount omnidirectional antenna for all 3G and 4G/LTE, xLTE, AWS frequencies. This antenna is compatibile with all 3G and 4G/LTE products and services from Verizon Wireless, AT&T Wireless, Sprint, T-Mobile, US Cellular, Bell Mobility, Rogers Wireless, Telus, Sasktel, Telcel, Movistar, Digicel and many other cellular operators around the globe.

Proxicast’s 24″ multi-band cellular antenna is ideal for many Outside applications, including building rooftops, utility poles, surveillance trailers, well sites, remote telemetry units, meters, boats, homes and offices. This omni-directional 9 dBi gain cellular antenna improves signals on all 3G & 4G/LTE cellular bands (700, 850, 900, 1700, 1800, 1900 and 2100 MHz) used in in the united states, Canada and Mexico. This antenna is also suitable for unlicensed 900 MHz (ISM) radio applications and 2.4 GHz WiFi / ISM band use.

The omni-directional design provides high gain without the cell tower location and antenna alignment hassles of directional antennas.

Specifications
Frequency: 698 – 2700 MHz
Gain: 9 dBi
Radiation: Omni
Polarization: Vertical
Impedance: 50 ohms
Connector: N Female – bottom feed via 12 in (300 mm) LMR 195 coax lead
Material: Fiberglass & Stainless Steel – Grey UV stable poly-urethane coating
Height: 23.6 in (600 mm)
Mount: Pole/wall (bracket and 2.5 in dia U-bolts included)

Requires a right away coaxial wired connection to an existing modem, router, amplifier, booster or radio

This antenna WILL NOT boost reception of cellular telephones unless they’re directly wired to the antenna. For cell phones, a powered booster/amplifier is required.

Is this compatible with my device? — Email Proxicast to check before ordering.

Note: Use our XBOOM cross-over bracket (ASIN B079WTQ4CM) to install 2 identical antennas separated by at least 22 inches for best LTE MIMO results.
Works with 2G, 3G, 4G, LTE, xLTE, AWS, GSM & CDMA cell carriers such as Verizon, AT&T, Sprint, T-Mobile, Telus, Bell Canada, Rogers, DigiCel, TelCel and more
Improves poor signal via high 9 dBi gain for cellular (700, 850, 900, 1700, 1800, 1900 and 2100 MHz), 2.4 GHz WiFi and 900 MHz ISM wireless bands
Female N connector with 12″ pigtail – Outside weatherproof fiberglass with high gloss urethane finish – Integrated ground plane – No additional ground plane needed – Mast sold one by one
Applications include M2M, Telemetry, SCADA, Video Security, Marine, Office & Home. Compatible with Cisco, Cradlepoint, Digi, MoFi, Novatel, Pepwave, Proxicast, Sierra, SureCall and weBoost equipment.
Should be connected via 50-ohm coaxial cable to a modem / router / gateway / access point / booster / radio device. Does not reinforce signal for phones or other devices indirectly wired to the antenna.

Additional information

Binding

Brand

Color

EAN

EAN List

Item Dimensions

Label

Manufacturer

Model

MPN

Package Dimensions

Package Quantity

Part Number

Product Group

Product Type Name

Publisher

Studio

UPC

UPC List

Reviews

There are no reviews yet.

Be the first to review “Proxicast 3G / 4G LTE 9 dBi Omni-Directional Permanent Mount Outdoor Fiberglass Antenna for Verizon, AT&T, Sprint, T…”

Your email address will not be published. Required fields are marked *